TROUBLESHOOTING

I press and hold the test button for 5 seconds and it does not beep.
Possible solutions:

1. Replace the battery.
2. Verify all connections between the alarm and airflow sensor are good.

The alarm is beeping once every minute.
Possible solutions:

1. Your battery is weak and needs to be replaced.
2. The power cords are touching or too close to each other. Separate the power cords by six inches.

The alarm is beeping rapidly 5 times every five seconds due to overheating.
Possible solutions:

1. Contact a professional technician to inspect your dryer.
2. Check the vents for a clog.

My dryer is indicating a clogged vent, but my DrySafer alarm is not beeping.
Possible solutions:

1. Press the test button to verify the battery is good.
2. Install the airflow sensor horizontally for a quicker response to a clog on this model of dryer.

The alarm is beeping 3 times every few minutes due to the beginning of a clogged line.
Possible solutions:

1. Clean lint filter.
2. Clean your vent.
3. Contact a professional technician to inspect your dryer.

The alarm is beeping 3 times every five seconds due to lint buildup or other clog in the vent.
Possible solutions:

1. Clean lint filter.
2. Clean your vent of any buildup or clog.
3. The vent is bent, kinked or crushed behind dryer.
4. Verify and remove any blockage in the outside vent hood.
5. The dryer has a clog inside.
6. Contact a professional technician to inspect your dryer.

The alarm beeped 3 times and my dryer is not running.
Possible solutions:

1. Something is obstructing the flap of the airflow sensor from fully closing. Remove sensor and clear obstruction.
2. The airflow sensor is facing downward. Install in a horizontal direction.

For any questions regarding installation, trouble shooting issues or additional product information, please email us at [email protected].